{"title":"Customer Favorites","description":null,"products":[{"product_id":"satin-brass-round-closet-rod-top-mount-bracket-32mm","title":"Satin Brass Round Closet Rod Top Mount Brackets (Pair) | 32mm","description":"\u003cp\u003e\u003cstrong\u003eDesigned where wall brackets won't work.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis round top mount bracket mounts directly beneath a shelf, giving you a clean, flexible way to install a closet rod when side walls aren't available—or simply aren't ideal.\u003c\/p\u003e\u003cp\u003eBecause the rod installs from above, this design works perfectly in cabinets, built-ins, shelving systems, laundry areas, or anywhere you have a solid horizontal surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA cleaner, more intentional look.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMounting from above eliminates bulky side brackets and keeps the focus on the rod itself.\u003c\/p\u003e\u003cp\u003eThe result is a streamlined, modern appearance that feels built-in—not added on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to support real weight.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCloset rods aren't just for looks—they need to perform.\u003c\/p\u003e\u003cp\u003eOur 32mm round rods are tested under real-world conditions, and this top mount bracket is designed to support them with confidence—whether you're hanging a few items or fully loading the rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSolid cast construction—not stamped shortcuts.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis top mount bracket is cast as a single piece—not assembled from multiple parts like some lower-cost alternatives.\u003c\/p\u003e\u003cp\u003eCasting creates a denser, more substantial part with cleaner lines and smoother edges, resulting in better durability and a more refined finished look. The Desunia logo is embossed directly into the top of the flange—subtle, but a clear sign you're getting our design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA smoother finish starts before the finish.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA great satin brass finish starts with a properly prepared surface.\u003c\/p\u003e\u003cp\u003eLong before it gets plated, each top mount bracket goes through a multi-step grinding and polishing process to refine the surface and remove any burrs or rough edges. This essential step sets the stage for everything that follows.\u003c\/p\u003e\u003cp\u003eAfter plating, the satin effect is applied through a careful hand-finishing process. Using a specialized abrasive wheel, each piece is brought to a soft, uniform brushed finish that gives satin brass its distinctive warm appearance.\u003c\/p\u003e\u003cp\u003eThe result is a rich, understated finish that adds warmth without being overly bright—and matches seamlessly with our rods and other components for a cohesive look throughout your space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClean, secure mounting.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis top mount bracket attaches using two screws for a simple, low-profile installation.\u003c\/p\u003e\u003cp\u003eThe design keeps the bracket firmly anchored while maintaining a clean, uncluttered look from below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple installation with a clean final result.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePredrill one mounting hole\u003c\/li\u003e\n\u003cli\u003eAttach the top mount bracket and leave the screw slightly loose\u003c\/li\u003e\n\u003cli\u003eRotate as needed to square it with the surface\u003c\/li\u003e\n\u003cli\u003ePredrill and install the second screw\u003c\/li\u003e\n\u003cli\u003eSlip the rod into place and repeat for the other end\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDesigned to work as part of a complete system.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor longer spans, our matching mid supports are designed to work seamlessly with these top mount brackets—same profile, same clean look.\u003c\/p\u003e\u003cp\u003eOur round rods are sold separately and available in multiple lengths, so you can build a setup that fits your space exactly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get…\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 satin brass round closet rod top mount brackets (sold as a pair, one for each end of the rod)\u003c\/li\u003e\n\u003cli\u003eMatching mounting screws (two lengths: 3\/4\" and 1 3\/16\" for thicker shelves)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47379707428953,"sku":"OCH-25002-SB","price":25.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/SB-End-Hanger-1.jpg?v=1791188631"},{"product_id":"satin-brass-oval-closet-rod-mid-hanger-15x30mm","title":"Satin Brass Oval Closet Rod Mid Hanger | 15mm x 30mm","description":"\u003cp\u003e\u003cstrong\u003eThe support you need—right where you need it.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMid hangers are designed to provide additional support for longer spans, helping prevent sag and keeping everything straight and solid over time.\u003c\/p\u003e\u003cp\u003eLet's take a look at what kind of sag you can expect with our oval rods. We tested them under real-world conditions—here are the results.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4' span → 63 lbs → 1\/8\" sag\u003c\/li\u003e\n\u003cli\u003e5' span → 79 lbs → 3\/8\" sag\u003c\/li\u003e\n\u003cli\u003e6' span → 95 lbs → 13\/16\" sag\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs you can see, a mid support is usually called for once you get past about 4½ feet—and even at 4 feet for heavily loaded closets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSolid cast construction—not stamped shortcuts.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese are cast as a single piece—not assembled from multiple parts like some lower-cost alternatives.\u003c\/p\u003e\u003cp\u003eCasting creates a denser, more substantial part with cleaner lines and smoother edges. The Desunia logo is embossed directly into the hanger, so you know you're getting the real thing—not a generic lookalike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesigned to work as part of a complete system.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese mid hangers are made to pair perfectly with our oval end brackets—same profile, same dimensions, same clean, modern look.\u003c\/p\u003e\u003cp\u003eThe result is a consistent, well-integrated installation from end to end, without mismatched components or awkward transitions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA smoother finish starts before the finish.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA great satin brass finish starts with a properly prepared surface.\u003c\/p\u003e\u003cp\u003eLong before it gets plated, each hanger goes through a multi-step grinding and polishing process to refine the surface and remove any burrs or rough edges. This essential step sets the stage for everything that follows.\u003c\/p\u003e\u003cp\u003eAfter plating, the satin effect is applied through a careful hand-finishing process. Using a specialized abrasive wheel, each piece is brought to a soft, uniform brushed finish that gives satin brass its distinctive warm appearance.\u003c\/p\u003e\u003cp\u003eThe result is a rich, understated finish that adds warmth without being overly bright—and matches seamlessly with our rods and other components for a cohesive look throughout your space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation with wall brackets.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstall both wall brackets first, mounting them the same distance below the shelf as the mid support\u003c\/li\u003e\n\u003cli\u003eSlide the mid hanger onto the rod\u003c\/li\u003e\n\u003cli\u003eInstall the rod onto the end brackets (you may need to flex it slightly)\u003c\/li\u003e\n\u003cli\u003eSlide the mid hanger into position and secure it with the provided screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstallation with end brackets.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstall the first end bracket\u003c\/li\u003e\n\u003cli\u003eSlide the mid hanger onto the rod\u003c\/li\u003e\n\u003cli\u003ePlace the second end bracket onto the rod and install it\u003c\/li\u003e\n\u003cli\u003eSlide the mid hanger into position and secure it with the provided screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get…\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 satin brass oval closet rod mid hanger\u003c\/li\u003e\n\u003cli\u003eMatching mounting screws (two lengths: 3\/4\" and 1 3\/16\" for thicker surfaces)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47380137836633,"sku":"OCH-17001-SB","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/BrassOvalMid.jpg?v=1791205945"},{"product_id":"no-mortise-bed-frame-brackets","title":"Black No-Mortise Bed Frame Brackets (Set for One Bed)","description":"\u003cp\u003e\u003cstrong\u003eSkip the mortises. Keep the strength.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding your own bed is one of the most satisfying projects in the shop, but chopping mortises for traditional bed rail hardware is slow, fussy work. Since the hardware disappears once the bed is assembled, there's no reason to bother. These brackets simply screw onto the surface: no mortises, no router, no chisel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt heavier than stamped hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach bracket is cut from 1\/8\" thick steel and stands over 5\" tall, so it's far stiffer than the thin stamped brackets you'll find elsewhere. It's hardware made to outlast the bed, and maybe get handed down with it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA tight, rattle-free joint.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHardened steel pins drop into precisely machined teardrop slots and pull the rail snug against the post, for a rigid connection with virtually zero play. No wobble, no squeaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast, foolproof assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe flat brackets go on the ends of the side rails, and the angled brackets go on the headboard and footboard. The angled brackets aren't handed, so there's no left or right to keep track of. Most beds go together in about 15 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLocks so you can lift the bed by its rails.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA locking screw through the indexing hole at each corner keeps the joint from lifting apart, so you can pick up and move the bed by its side rails. That extra security is especially welcome on bunk beds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Flat side rail brackets\u003c\/li\u003e\n\u003cli\u003e4 Angled headboard \/ footboard brackets\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003cli\u003eIllustrated instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne kit does one complete bed.\u003c\/p\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403175411801,"sku":"FBF-20001-BK","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/1-Bed_Bracket_Complete_Set.jpg?v=1791518287"},{"product_id":"2-inch-heavy-duty-stainless-steel-piano-hinge","title":"2\" Heavy Duty Stainless Steel Piano Hinge (Indoor)","description":"\u003cp\u003e\u003cstrong\u003eFor doors, fold-down seats, lids and a whole lot more.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA piano hinge carries the load along its entire length, so it's the go-to for anything long, heavy or hard-working: cabinet and closet doors, fold-down seats and tables, chest and toy box lids, and drop-front doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavier than the hinges you'll find elsewhere.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach leaf is a full .060\" thick. Most piano hinges on the market are only .035\"–.040\", so this one is roughly 50% beefier, and you can feel it the moment you pick it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2\" when fully open\u003c\/li\u003e\n\u003cli\u003eLeaf thickness: .060\"\u003c\/li\u003e\n\u003cli\u003eMaterial: 201 stainless steel\u003c\/li\u003e\n\u003cli\u003eFinish: satin stainless\u003c\/li\u003e\n\u003cli\u003eLengths: 24\", 48\" and 72\", and easy to cut down\u003c\/li\u003e\n\u003cli\u003eScrews: #6 x 3\/4\" Phillips head, included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA finish that hides fingerprints.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe satin finish has a soft, brushed look that discourages finger marks and stays looking clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndoors only, please.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e201 stainless resists corrosion far better than plain carbon steel, but it isn't as tough as 304 grade. Keep it out of the weather. For outdoor projects, choose our 1-1\/2\" stainless piano hinge instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScrews included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMatching #6 x 3\/4\" Phillips head screws come in the box, so you're ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHold the hinge against the work and center it so the end holes look balanced.\u003c\/li\u003e\n\u003cli\u003eMark your cut line (a strip of masking tape makes it easy to see) and cut to length with a hacksaw.\u003c\/li\u003e\n\u003cli\u003eFile or grind away any burr left from the cut.\u003c\/li\u003e\n\u003cli\u003ePre-drill only a few holes, using a self-centering bit, and hang the door or lid.\u003c\/li\u003e\n\u003cli\u003eCheck the alignment. The undrilled holes let you make fine adjustments.\u003c\/li\u003e\n\u003cli\u003eOnce it's right, pre-drill and drive the rest of the screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 Stainless steel piano hinge, 2\" wide, in the length you choose\u003c\/li\u003e\n\u003cli\u003eMatching #6 x 3\/4\" installation screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"24\"","offer_id":47403201101913,"sku":"CHP-20024-SS","price":43.99,"currency_code":"USD","in_stock":true},{"title":"48\"","offer_id":47403201134681,"sku":"CHP-20048-SS","price":56.99,"currency_code":"USD","in_stock":true},{"title":"72\"","offer_id":47403201167449,"sku":"CHP-20072-SS","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/1_SS_Hinge_Main_24.jpg?v=1791519214"},{"product_id":"5mm-drill-bushings-shelf-holes-jigs-10-pack","title":"5mm Drill Bushings for Shelf Holes \u0026 Jigs (10 Pack)","description":"\u003cp\u003e\u003cstrong\u003eBuild your own shelf pin jig.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese hardened 5mm drill bushings let you make a shelf hole jig that drills straight, accurately placed holes for years. Pair them with a 5mm bit and a piece of good scrap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHardened so the jig doesn't wear out.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA wood jig on its own wallows out after a few cabinets. The hardened bushing guides the bit instead, so hole number five hundred lands where hole number one did.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo glue needed.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLinear grooves milled into each bushing grip the wood and hold it in place. One end is slightly tapered, so it starts easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to install.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBore 3\/8\" holes in your jig stock on a drill press and tap the bushings in. Ten bushings will cover about a 20\" jig at 2\" spacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBore: 5mm (for a 5mm drill bit)\u003c\/li\u003e\n\u003cli\u003eLength: .664\"\u003c\/li\u003e\n\u003cli\u003eMounting hole: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened, with milled linear grooves and one tapered end\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e10 x 5mm hardened drill bushings\u003c\/li\u003e\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403244060761,"sku":"TJB-10510-ZN","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/5mm_Vert.jpg?v=1791520749"},{"product_id":"adjustable-cabinet-leveler-legs-12-pack","title":"Black Adjustable Cabinet Leveler Legs, 3-7\/8\" to 6\" (12 Pack)","description":"\u003cp\u003e\u003cstrong\u003ePut the shims away.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLeveling a run of cabinets with wood shims is slow, fiddly work. These black legs adjust by hand from 3-7\/8\" to 6\", and you can move each one a few thousandths of an inch at a time until the cabinet sits dead level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrong enough for a full kitchen.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach leg is rated for 330 lbs. Line the legs up under the cabinet sides and the load goes straight down into the floor, right where you want it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to reach in tight spots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach foot has 5 slots for a flat-blade screwdriver, so you can still make adjustments once the cabinet is tucked in against the wall. Take a little care when sliding the cabinet into place so you don't knock a leg out of line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter use of your sheet goods.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWithout an integral toe kick, you'll get 6 cabinet sides out of a 4 x 8 sheet instead of 4. The legs also hold the cabinet bottom up off the floor, away from moisture, and leave extra room underneath for plumbing and ducting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToe kick clips included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clips mount to the back of the toe kick board and snap onto the legs. Mount each leg with 4 of the provided screws, and use an adjustable square to keep the same setback from the cabinet front on every leg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight adjustment: 3-7\/8\" to 6\"\u003c\/li\u003e\n\u003cli\u003eLoad rating: 330 lbs. per leg\u003c\/li\u003e\n\u003cli\u003eAdjustment: by hand, or with a flat-blade screwdriver (5 slots per foot)\u003c\/li\u003e\n\u003cli\u003eMounting: 4 screws per leg\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12 Black leveler legs\u003c\/li\u003e\n\u003cli\u003e6 Toe kick clips\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403249565785,"sku":"CLE-20012-BK","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/OBT_Kitchen_Cabinet_Levelers_Main_12.jpg?v=1791520910"},{"product_id":"2-piece-wire-grommet-brush-opening-satin-nickel","title":"Satin Nickel 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Nickel\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403253858393,"sku":"FWG-10000-SN","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Satin_Nickel.jpg?v=1791521039"},{"product_id":"keyed-alike-cabinet-lock-7-8-bore-polished-brass","title":"Polished Brass Keyed Alike Cabinet Lock, 7\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eSimple security for drawers and doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA good fit for desk drawers, cabinets and liquor cabinets, this cylinder lock is easy to install and keyed alike, so one key works every lock you put in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeyed alike.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the keys are identical. Put one on every drawer in an office or every door in a kitchen and you only need to carry one key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for standard work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cylinder is .866\" across and needs a 7\/8\" hole. It's 15\/16\" long, so in a 3\/4\" door or drawer front it stands 3\/16\" proud of the face. The bolt throws 7\/16\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWork the lock by hand first to decide where the hole goes. Bore a 7\/8\" hole with a sharp bit, with a backup board clamped behind to stop chip-out. Mount the lock with the screws provided, then the strike plate. You may need a bit of wood blocking to line the strike up. The escutcheon trim ring should fit snug; if it has any play, a drop of glue will hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder diameter: .866\"\u003c\/li\u003e\n\u003cli\u003eBore size: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eCylinder length: 15\/16\"\u003c\/li\u003e\n\u003cli\u003eProjection in a 3\/4\" door or drawer front: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eBolt throw: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eKeying: keyed alike\u003c\/li\u003e\n\u003cli\u003eFinish: Polished Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lock with 7\/8\" cylinder\u003c\/li\u003e\n\u003cli\u003e2 Keys\u003c\/li\u003e\n\u003cli\u003e1 Nickel strike plate\u003c\/li\u003e\n\u003cli\u003e1 Matching escutcheon trim ring\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403260280921,"sku":"FLO-10000-PB","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Drawer_Lock_Brass.jpg?v=1791521142"},{"product_id":"thumb-screw-panel-retainer-clips-25-pack","title":"Bronze Thumb Screw Panel Retainer Clips (25 Pack)","description":"\u003cp\u003e\u003cstrong\u003eAn all-metal way to hold the glass.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese retainer clips are an all-metal alternative to plastic retaining clips for glass cabinet doors, and they go in in seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTension you can dial in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA thumb screw lets you set exactly how hard the clip presses on the glass, no tools needed. Soft brown vinyl tips protect the glass and keep it from rattling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with thin glass or thick doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the screw backed all the way out, the glass can sit flush with the back of the door. Tighten it all the way down and it holds the back of the glass at an offset of up to 3\/8\". Flip the clip over and it handles offsets up to 1-1\/8\" for thicker doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA finish that goes with most wood.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe classic bronze finish suits most wood species and paint colors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA shop tip.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the screw sticks out farther than you want, pull off the vinyl cap and grind the screw end down to length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: all metal, with vinyl tips\u003c\/li\u003e\n\u003cli\u003eFinish: bronze\u003c\/li\u003e\n\u003cli\u003eOffset range: 0\" to 3\/8\" (up to 1-1\/8\" with the clip flipped)\u003c\/li\u003e\n\u003cli\u003eAdjustment: tool-free thumb screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25 Panel retainer clips with thumb screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403261034585,"sku":"FTL-20025-BZ","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Thumb_Screw_Panel_Retainer_Main.jpg?v=1791521174"},{"product_id":"polished-nickel-1-4-inch-bracket-shelf-support-pegs-25-pack","title":"Polished Nickel 1\/4\" Bracket Shelf Support Pegs (25 Pack)","description":"\u003cp\u003e\u003cstrong\u003eAs strong as shelf pegs come.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bracket design puts a flat \"L\" under the shelf, and once the shelf is in place it keeps the pin firmly seated in the cabinet hole. That all but eliminates the chance of tear-out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA real shelf under the shelf.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe \"L\" is 1\/2\" wide and reaches a full 3\/4\" into the cabinet, so the shelf has a solid seat to rest on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits 1\/4\" holes.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for cabinets drilled with 1\/4\" shelf pin holes, in a polished nickel finish that looks good in any cabinet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStyle: bracket-type shelf support peg\u003c\/li\u003e\n\u003cli\u003eFits: 1\/4\" shelf pin holes\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eSupport \"L\" width: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eProjection into cabinet: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eMaterial: solid steel\u003c\/li\u003e\n\u003cli\u003eFinish: polished nickel\u003c\/li\u003e\n\u003cli\u003ePack count: 25\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e25 polished nickel 1\/4\" bracket-type shelf support pegs\u003c\/li\u003e\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403280105561,"sku":"OSB-10025-PN","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/0.25_Shelf_Brackets_No_Hole_Nickel.jpg?v=1791696146"},{"product_id":"super-duty-cabinet-leveler-legs-lock-nuts-4-pack","title":"Super Duty Cabinet Leveler Legs with Lock Nuts (4 Pack)","description":"\u003cp\u003e\u003cstrong\u003eBuilt for the heavy stuff.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese are for heavy machines, workbenches and equipment, especially anything that vibrates. When a regular leveler isn't enough, this is the one to reach for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker steel where it counts.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is 0.10\" thick steel, where most levelers use 0.08\". The zinc-plated foot has twice the steel of a typical foot, with a nylon base that's permanently embedded so it can't pop off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA stem that handles uneven floors.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1\/2\" diameter stem ends in a ball that sits in a nylon socket, so the foot tilts to sit flat on a floor that isn't.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLocks at the height you set.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnce you've got it level, run the 3\/4\" lock nut up tight against the bottom of the housing and the height stays put, vibration or not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to install.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3\/4\" wide ledger hooks under the cabinet. Hook it on, pre-drill, and fasten through both the side and the bottom with the screws we provide. They're pan head screws and take a #2 Phillips bit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHousing: 0.10\" thick steel\u003c\/li\u003e\n\u003cli\u003eStem: 1\/2\" diameter, ball end in nylon socket\u003c\/li\u003e\n\u003cli\u003eFoot: zinc-plated steel with embedded nylon base\u003c\/li\u003e\n\u003cli\u003eLedger: 3\/4\" wide, hooks under the cabinet\u003c\/li\u003e\n\u003cli\u003eLock nut: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eScrews: #10 x 1-1\/8\" pan head, take a #2 Phillips bit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 super duty leveler legs with lock nuts\u003c\/li\u003e\n\u003cli\u003e24 #10 x 1-1\/8\" pan head screws (#2 Phillips)\u003c\/li\u003e\n\u003cli\u003e1 6mm hex wrench\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47405211615321,"sku":"CLE-50001-ZN","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Super_Duty_Levelers_Main.jpg?v=1791534573"},{"product_id":"interlocking-steel-z-clips-1-set","title":"Interlocking Steel Z-Clips (1 Set)","description":"\u003cp\u003e\u003cstrong\u003eHang it flush. Hang it solid.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese Z-clips mount almost anything flush to a vertical surface: artwork, headboards, wall paneling, cabinets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOnly 1\/4\" thick.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clips take up only 1\/4\" of thickness. Rout a recess in the back of the piece and it hangs completely flush to the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteel, not aluminum.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese clips are made of steel, so they're very strong.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThey interlock, so nothing slides off.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two halves lock together, so a hung item can't slide off to the side. That's a big safety feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasier layout.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe countersunk screw holes are symmetrical, not staggered, which makes layout much easier. Each set has about 1\/16\" of side-to-side play. That's forgiving, but lay out carefully.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to install.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHole spacing is 1-9\/16\". Find the exact center of the stud and drive the 1-3\/4\" screws at a slight angle for a good bite.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eAttach the wall clip first.\u003c\/li\u003e\n\u003cli\u003eSecure the clip to the item using just 2 screws.\u003c\/li\u003e\n\u003cli\u003eHang the item. If no tweaks are needed, install the remaining screws.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eAssembled thickness: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eHole spacing: 1-9\/16\"\u003c\/li\u003e\n\u003cli\u003eLateral play: About 1\/16\"\u003c\/li\u003e\n\u003cli\u003eScrews: 1-3\/4\", included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 set of interlocking steel Z-clips (2 halves)\u003c\/li\u003e\n\u003cli\u003eAll the necessary screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47427755835481,"sku":"SZC-10002-SS","price":3.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/OBT_Z_Clips_3.jpg?v=1791702892"}],"url":"https:\/\/desunia.com\/collections\/customer-favorites.oembed","provider":"Desunia","version":"1.0","type":"link"}