{"title":"Furniture Hardware","description":null,"products":[{"product_id":"no-mortise-bed-frame-brackets","title":"Black No-Mortise Bed Frame Brackets (Set for One Bed)","description":"\u003cp\u003e\u003cstrong\u003eSkip the mortises. Keep the strength.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding your own bed is one of the most satisfying projects in the shop, but chopping mortises for traditional bed rail hardware is slow, fussy work. Since the hardware disappears once the bed is assembled, there's no reason to bother. These brackets simply screw onto the surface: no mortises, no router, no chisel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt heavier than stamped hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach bracket is cut from 1\/8\" thick steel and stands over 5\" tall, so it's far stiffer than the thin stamped brackets you'll find elsewhere. It's hardware made to outlast the bed, and maybe get handed down with it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA tight, rattle-free joint.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHardened steel pins drop into precisely machined teardrop slots and pull the rail snug against the post, for a rigid connection with virtually zero play. No wobble, no squeaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast, foolproof assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe flat brackets go on the ends of the side rails, and the angled brackets go on the headboard and footboard. The angled brackets aren't handed, so there's no left or right to keep track of. Most beds go together in about 15 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLocks so you can lift the bed by its rails.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA locking screw through the indexing hole at each corner keeps the joint from lifting apart, so you can pick up and move the bed by its side rails. That extra security is especially welcome on bunk beds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Flat side rail brackets\u003c\/li\u003e\n\u003cli\u003e4 Angled headboard \/ footboard brackets\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003cli\u003eIllustrated instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne kit does one complete bed.\u003c\/p\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403175411801,"sku":"FBF-20001-BK","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/1-Bed_Bracket_Complete_Set.jpg?v=1791518287"},{"product_id":"adjustable-cabinet-leveler-legs-12-pack","title":"Black Adjustable Cabinet Leveler Legs, 3-7\/8\" to 6\" (12 Pack)","description":"\u003cp\u003e\u003cstrong\u003ePut the shims away.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLeveling a run of cabinets with wood shims is slow, fiddly work. These black legs adjust by hand from 3-7\/8\" to 6\", and you can move each one a few thousandths of an inch at a time until the cabinet sits dead level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrong enough for a full kitchen.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach leg is rated for 330 lbs. Line the legs up under the cabinet sides and the load goes straight down into the floor, right where you want it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to reach in tight spots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach foot has 5 slots for a flat-blade screwdriver, so you can still make adjustments once the cabinet is tucked in against the wall. Take a little care when sliding the cabinet into place so you don't knock a leg out of line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter use of your sheet goods.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWithout an integral toe kick, you'll get 6 cabinet sides out of a 4 x 8 sheet instead of 4. The legs also hold the cabinet bottom up off the floor, away from moisture, and leave extra room underneath for plumbing and ducting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToe kick clips included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clips mount to the back of the toe kick board and snap onto the legs. Mount each leg with 4 of the provided screws, and use an adjustable square to keep the same setback from the cabinet front on every leg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight adjustment: 3-7\/8\" to 6\"\u003c\/li\u003e\n\u003cli\u003eLoad rating: 330 lbs. per leg\u003c\/li\u003e\n\u003cli\u003eAdjustment: by hand, or with a flat-blade screwdriver (5 slots per foot)\u003c\/li\u003e\n\u003cli\u003eMounting: 4 screws per leg\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12 Black leveler legs\u003c\/li\u003e\n\u003cli\u003e6 Toe kick clips\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403249565785,"sku":"CLE-20012-BK","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/OBT_Kitchen_Cabinet_Levelers_Main_12.jpg?v=1791520910"},{"product_id":"nylon-furniture-levelers-t-nuts-set-of-4","title":"White Nylon Furniture Levelers with T-Nuts, 1\/4\" Thread (Set of 4)","description":"\u003cp\u003e\u003cstrong\u003eLevel it once and forget it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA table, stool or cabinet that rocks on an uneven floor gets old fast. These screw-in levelers let you dial each corner in so the piece sits solid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKind to your floors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white nylon foot is 1\" across and tapered, with about 3\/4\" of contact on the floor, so it's safe on hardwood. Ridges around the edge give your fingers something to grip while you adjust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid threads, not wood screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach leveler has a 1\/4\" threaded stud, 1\" long, that runs into a T-nut. Every leg adjusts from 0\" to 9\/16\" and carries 100 lbs., or 400 lbs. for the set of 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalls in under 10 minutes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrill a 5\/16\" hole, 1\" deep, at each corner. A wrap of tape on the bit makes a handy depth gauge. Tap in the T-nuts, screw in the levelers and back them out until the piece is level. Keep each leg in line with the cabinet sides for the most strength, and use an adjustable square to hold the same setback from the front.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere to use them.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTables, stools, grandfather clocks and most wood cabinets that need leveling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: 1\/4\" threaded stud, 1\" long\u003c\/li\u003e\n\u003cli\u003eAdjustment: 0\" to 9\/16\" per leg\u003c\/li\u003e\n\u003cli\u003eFoot: 1\" diameter, tapered, about 3\/4\" floor contact\u003c\/li\u003e\n\u003cli\u003eMaterial: white nylon foot\u003c\/li\u003e\n\u003cli\u003eLoad rating: 100 lbs. per leg, 400 lbs. per set of 4\u003c\/li\u003e\n\u003cli\u003eMounting hole: 5\/16\" diameter, 1\" deep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 White levelers\u003c\/li\u003e\n\u003cli\u003e4 T-nuts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403250221145,"sku":"FLS-40004-WH","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/LEFRN-NY-WHT_kfyw-54.jpg?v=1791520925"},{"product_id":"heavy-duty-cabinet-leveler-legs-lock-nuts-4-pack","title":"Heavy Duty Cabinet Leveler Legs with Lock Nuts (4 Pack)","description":"\u003cp\u003e\u003cstrong\u003eBuilt for real weight.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach leg is rated for 600 lbs. The housing is 14 ga. (.080\") zinc-plated steel, so these will hold up under loaded cabinets, workbenches and built-ins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ledger carries the load, not the screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery housing has a 7\/16\" wide ledger that hooks under the cabinet, so the weight bears on steel instead of hanging on the screws. Hook it on and fasten it with the screws provided. They're pan head screws and take a #2 Phillips bit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLock it where you set it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10mm (3\/8\") shaft adjusts from 0\" to 2-1\/2\". Once it's level, snug the 10mm lock nut and it stays put.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to adjust.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLift the cabinet a little with a pry bar and turn the shaft by hand, or use the included 5mm hex wrench. If you can't get at the leg, drill an access hole through the cabinet floor and adjust from above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloor-friendly feet.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1-1\/4\" foot spins freely and has a black polyethylene cap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHousing: 14 ga. (.080\") zinc-plated steel\u003c\/li\u003e\n\u003cli\u003eLedger width: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eLoad rating: 600 lbs. per leg\u003c\/li\u003e\n\u003cli\u003eShaft: 10mm (3\/8\") diameter\u003c\/li\u003e\n\u003cli\u003eAdjustment: 0\" to 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFoot: 1-1\/4\" diameter, free-spinning, black polyethylene cap\u003c\/li\u003e\n\u003cli\u003eLock nuts: 10mm\u003c\/li\u003e\n\u003cli\u003eScrews: #10 x 3\/4\" nickel-plated pan head, take a #2 Phillips bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Heavy duty leveler legs with lock nuts\u003c\/li\u003e\n\u003cli\u003e16 Pan head screws (#10 x 3\/4\", #2 Phillips)\u003c\/li\u003e\n\u003cli\u003e1 5mm Hex wrench\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403251302489,"sku":"CLE-10004-ZN","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Heavy_Duty_Levelers_Long_Screw_Layered_Main.jpg?v=1791520944"},{"product_id":"felt-furniture-levelers-t-nuts-set-of-4","title":"Brown Felt Furniture Levelers with T-Nuts, 1\/4\" Thread (Set of 4)","description":"\u003cp\u003e\u003cstrong\u003eLevel furniture without scratching the floor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese levelers have a nylon foot capped with high-density felt, so you can level a table or cabinet right on a hardwood floor without leaving marks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFelt that stays put.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe base has two parts: a hard espresso-colored plastic section and a grey high-density felt pad that's permanently epoxied on. The felt resists compressing, so the piece stays level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThreaded, not screwed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach leveler has a 1\/4\" threaded stud, 1\" long, that runs into a T-nut. Every leg adjusts from 0\" to 3\/4\" and carries 100 lbs., or 400 lbs. for the set of 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalls in under 10 minutes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrill a 5\/16\" hole, 1\" deep, at each corner. A wrap of tape on the bit makes a handy depth gauge. Tap in the T-nuts with a hammer, screw in the levelers and back them out until the piece sits level. Keep each leg in line with the cabinet sides for the most strength, and use an adjustable square to hold the same setback from the front.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere to use them.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTables, stools, grandfather clocks and most wood cabinets that need leveling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: 1\/4\" threaded stud, 1\" long\u003c\/li\u003e\n\u003cli\u003eAdjustment: 0\" to 3\/4\" per leg\u003c\/li\u003e\n\u003cli\u003eFoot: nylon with a high-density felt base, epoxied on\u003c\/li\u003e\n\u003cli\u003eLoad rating: 100 lbs. per leg, 400 lbs. per set of 4\u003c\/li\u003e\n\u003cli\u003eMounting hole: 5\/16\" diameter, 1\" deep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Brown felt levelers\u003c\/li\u003e\n\u003cli\u003e4 T-nuts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403251564633,"sku":"CLE-50004-BR","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Felt_Leveler_Main.jpg?v=1791520955"},{"product_id":"2-piece-wire-grommet-brush-opening-polished-chrome","title":"Polished Chrome 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Polished Chrome\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403252645977,"sku":"FWG-10000-PC","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Polished_Chrome.jpg?v=1791521018"},{"product_id":"2-piece-wire-grommet-brush-opening-black","title":"Black 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403253366873,"sku":"FWG-10000-BK","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Black.jpg?v=1791521028"},{"product_id":"2-piece-wire-grommet-brush-opening-satin-nickel","title":"Satin Nickel 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Satin Nickel\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403253858393,"sku":"FWG-10000-SN","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Satin_Nickel.jpg?v=1791521039"},{"product_id":"2-piece-wire-grommet-brush-opening-white","title":"White 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: White\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403254087769,"sku":"FWG-10000-WH","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_White.jpg?v=1791521054"},{"product_id":"2-piece-wire-grommet-brush-opening-matte-chrome","title":"Matte Chrome 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Matte Chrome\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403257659481,"sku":"FWG-10000-MC","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Matte_Chrome.jpg?v=1791521064"},{"product_id":"2-piece-wire-grommet-brush-opening-polished-brass","title":"Polished Brass 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Polished Brass\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403258118233,"sku":"FWG-10000-PB","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Polished_Brass.jpg?v=1791521074"},{"product_id":"2-piece-wire-grommet-brush-opening-antique-brass","title":"Antique Brass 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Antique Brass\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403258380377,"sku":"FWG-10000-AB","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Antique_Brass.jpg?v=1791521085"},{"product_id":"2-piece-wire-grommet-brush-opening-antique-bronze","title":"Antique Bronze 2-Piece Wire Grommet with Brush Opening, 2-3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eA clean finish for your cord holes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, not plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo pieces, so the plugs go through first.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2\" or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA brush that protects your wires.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBore a 2-3\/8\" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: 2-3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eOuter ring inside diameter: 2-1\/16\"\u003c\/li\u003e\n\u003cli\u003eWire opening: 3\/4\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003ePlug capacity: 2\" or less\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast zinc\u003c\/li\u003e\n\u003cli\u003eFinish: Antique Bronze\u003c\/li\u003e\n\u003cli\u003eOpening liner: nylon bristle brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Two-piece wire grommet (lower ring and top piece)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403258642521,"sku":"FWG-10000-BZ","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/60mm_Wire_Grommet_-_Antique_Bronze.jpg?v=1791521095"},{"product_id":"keyed-alike-cabinet-lock-7-8-bore-polished-chrome","title":"Polished Chrome Keyed Alike Cabinet Lock, 7\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eSimple security for drawers and doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA good fit for desk drawers, cabinets and liquor cabinets, this cylinder lock is easy to install and keyed alike, so one key works every lock you put in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeyed alike.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the keys are identical. Put one on every drawer in an office or every door in a kitchen and you only need to carry one key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for standard work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cylinder is .866\" across and needs a 7\/8\" hole. It's 15\/16\" long, so in a 3\/4\" door or drawer front it stands 3\/16\" proud of the face. The bolt throws 7\/16\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWork the lock by hand first to decide where the hole goes. Bore a 7\/8\" hole with a sharp bit, with a backup board clamped behind to stop chip-out. Mount the lock with the screws provided, then the strike plate. You may need a bit of wood blocking to line the strike up. The escutcheon trim ring should fit snug; if it has any play, a drop of glue will hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder diameter: .866\"\u003c\/li\u003e\n\u003cli\u003eBore size: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eCylinder length: 15\/16\"\u003c\/li\u003e\n\u003cli\u003eProjection in a 3\/4\" door or drawer front: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eBolt throw: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eKeying: keyed alike\u003c\/li\u003e\n\u003cli\u003eFinish: Polished Chrome\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lock with 7\/8\" cylinder\u003c\/li\u003e\n\u003cli\u003e2 Keys\u003c\/li\u003e\n\u003cli\u003e1 Nickel strike plate\u003c\/li\u003e\n\u003cli\u003e1 Matching escutcheon trim ring\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403258904665,"sku":"FLO-10000-PC","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Drawer_Lock_Chrome.jpg?v=1791521111"},{"product_id":"keyed-alike-cabinet-lock-7-8-bore-black","title":"Black Keyed Alike Cabinet Lock, 7\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eSimple security for drawers and doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA good fit for desk drawers, cabinets and liquor cabinets, this cylinder lock is easy to install and keyed alike, so one key works every lock you put in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeyed alike.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the keys are identical. Put one on every drawer in an office or every door in a kitchen and you only need to carry one key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for standard work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cylinder is .866\" across and needs a 7\/8\" hole. It's 15\/16\" long, so in a 3\/4\" door or drawer front it stands 3\/16\" proud of the face. The bolt throws 7\/16\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWork the lock by hand first to decide where the hole goes. Bore a 7\/8\" hole with a sharp bit, with a backup board clamped behind to stop chip-out. Mount the lock with the screws provided, then the strike plate. You may need a bit of wood blocking to line the strike up. The escutcheon trim ring should fit snug; if it has any play, a drop of glue will hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder diameter: .866\"\u003c\/li\u003e\n\u003cli\u003eBore size: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eCylinder length: 15\/16\"\u003c\/li\u003e\n\u003cli\u003eProjection in a 3\/4\" door or drawer front: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eBolt throw: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eKeying: keyed alike\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lock with 7\/8\" cylinder\u003c\/li\u003e\n\u003cli\u003e2 Keys\u003c\/li\u003e\n\u003cli\u003e1 Nickel strike plate\u003c\/li\u003e\n\u003cli\u003e1 Matching escutcheon trim ring\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403259166809,"sku":"FLO-10000-BK","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Drawer_Lock_Black.jpg?v=1791521121"},{"product_id":"keyed-alike-cabinet-lock-7-8-bore-polished-nickel","title":"Polished Nickel Keyed Alike Cabinet Lock, 7\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eSimple security for drawers and doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA good fit for desk drawers, cabinets and liquor cabinets, this cylinder lock is easy to install and keyed alike, so one key works every lock you put in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeyed alike.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the keys are identical. Put one on every drawer in an office or every door in a kitchen and you only need to carry one key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for standard work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cylinder is .866\" across and needs a 7\/8\" hole. It's 15\/16\" long, so in a 3\/4\" door or drawer front it stands 3\/16\" proud of the face. The bolt throws 7\/16\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWork the lock by hand first to decide where the hole goes. Bore a 7\/8\" hole with a sharp bit, with a backup board clamped behind to stop chip-out. Mount the lock with the screws provided, then the strike plate. You may need a bit of wood blocking to line the strike up. The escutcheon trim ring should fit snug; if it has any play, a drop of glue will hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder diameter: .866\"\u003c\/li\u003e\n\u003cli\u003eBore size: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eCylinder length: 15\/16\"\u003c\/li\u003e\n\u003cli\u003eProjection in a 3\/4\" door or drawer front: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eBolt throw: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eKeying: keyed alike\u003c\/li\u003e\n\u003cli\u003eFinish: Polished Nickel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lock with 7\/8\" cylinder\u003c\/li\u003e\n\u003cli\u003e2 Keys\u003c\/li\u003e\n\u003cli\u003e1 Nickel strike plate\u003c\/li\u003e\n\u003cli\u003e1 Matching escutcheon trim ring\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403259396185,"sku":"FLO-10000-PN","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Drawer_Lock_Nickel.jpg?v=1791521132"},{"product_id":"keyed-alike-cabinet-lock-7-8-bore-polished-brass","title":"Polished Brass Keyed Alike Cabinet Lock, 7\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eSimple security for drawers and doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA good fit for desk drawers, cabinets and liquor cabinets, this cylinder lock is easy to install and keyed alike, so one key works every lock you put in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeyed alike.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the keys are identical. Put one on every drawer in an office or every door in a kitchen and you only need to carry one key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for standard work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cylinder is .866\" across and needs a 7\/8\" hole. It's 15\/16\" long, so in a 3\/4\" door or drawer front it stands 3\/16\" proud of the face. The bolt throws 7\/16\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWork the lock by hand first to decide where the hole goes. Bore a 7\/8\" hole with a sharp bit, with a backup board clamped behind to stop chip-out. Mount the lock with the screws provided, then the strike plate. You may need a bit of wood blocking to line the strike up. The escutcheon trim ring should fit snug; if it has any play, a drop of glue will hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder diameter: .866\"\u003c\/li\u003e\n\u003cli\u003eBore size: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eCylinder length: 15\/16\"\u003c\/li\u003e\n\u003cli\u003eProjection in a 3\/4\" door or drawer front: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eBolt throw: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eKeying: keyed alike\u003c\/li\u003e\n\u003cli\u003eFinish: Polished Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lock with 7\/8\" cylinder\u003c\/li\u003e\n\u003cli\u003e2 Keys\u003c\/li\u003e\n\u003cli\u003e1 Nickel strike plate\u003c\/li\u003e\n\u003cli\u003e1 Matching escutcheon trim ring\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403260280921,"sku":"FLO-10000-PB","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Drawer_Lock_Brass.jpg?v=1791521142"},{"product_id":"keyed-alike-cabinet-lock-7-8-bore-antique-brass","title":"Antique Brass Keyed Alike Cabinet Lock, 7\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eSimple security for drawers and doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA good fit for desk drawers, cabinets and liquor cabinets, this cylinder lock is easy to install and keyed alike, so one key works every lock you put in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeyed alike.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the keys are identical. Put one on every drawer in an office or every door in a kitchen and you only need to carry one key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for standard work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cylinder is .866\" across and needs a 7\/8\" hole. It's 15\/16\" long, so in a 3\/4\" door or drawer front it stands 3\/16\" proud of the face. The bolt throws 7\/16\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWork the lock by hand first to decide where the hole goes. Bore a 7\/8\" hole with a sharp bit, with a backup board clamped behind to stop chip-out. Mount the lock with the screws provided, then the strike plate. You may need a bit of wood blocking to line the strike up. The escutcheon trim ring should fit snug; if it has any play, a drop of glue will hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder diameter: .866\"\u003c\/li\u003e\n\u003cli\u003eBore size: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eCylinder length: 15\/16\"\u003c\/li\u003e\n\u003cli\u003eProjection in a 3\/4\" door or drawer front: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eBolt throw: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eKeying: keyed alike\u003c\/li\u003e\n\u003cli\u003eFinish: Antique Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lock with 7\/8\" cylinder\u003c\/li\u003e\n\u003cli\u003e2 Keys\u003c\/li\u003e\n\u003cli\u003e1 Nickel strike plate\u003c\/li\u003e\n\u003cli\u003e1 Matching escutcheon trim ring\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403260543065,"sku":"FLO-10000-AB","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Drawer_Lock_Antique_Brass.jpg?v=1791521152"},{"product_id":"keyed-alike-cabinet-lock-7-8-bore-antique-bronze","title":"Antique Bronze Keyed Alike Cabinet Lock, 7\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eSimple security for drawers and doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA good fit for desk drawers, cabinets and liquor cabinets, this cylinder lock is easy to install and keyed alike, so one key works every lock you put in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeyed alike.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the keys are identical. Put one on every drawer in an office or every door in a kitchen and you only need to carry one key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for standard work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cylinder is .866\" across and needs a 7\/8\" hole. It's 15\/16\" long, so in a 3\/4\" door or drawer front it stands 3\/16\" proud of the face. The bolt throws 7\/16\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWork the lock by hand first to decide where the hole goes. Bore a 7\/8\" hole with a sharp bit, with a backup board clamped behind to stop chip-out. Mount the lock with the screws provided, then the strike plate. You may need a bit of wood blocking to line the strike up. The escutcheon trim ring should fit snug; if it has any play, a drop of glue will hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder diameter: .866\"\u003c\/li\u003e\n\u003cli\u003eBore size: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eCylinder length: 15\/16\"\u003c\/li\u003e\n\u003cli\u003eProjection in a 3\/4\" door or drawer front: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eBolt throw: 7\/16\"\u003c\/li\u003e\n\u003cli\u003eKeying: keyed alike\u003c\/li\u003e\n\u003cli\u003eFinish: Antique Bronze\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lock with 7\/8\" cylinder\u003c\/li\u003e\n\u003cli\u003e2 Keys\u003c\/li\u003e\n\u003cli\u003e1 Nickel strike plate\u003c\/li\u003e\n\u003cli\u003e1 Matching escutcheon trim ring\u003c\/li\u003e\n\u003cli\u003eAll mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403260772441,"sku":"FLO-10000-BZ","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Drawer_Lock_Antique_Bronze.jpg?v=1791521163"},{"product_id":"thumb-screw-panel-retainer-clips-25-pack","title":"Bronze Thumb Screw Panel Retainer Clips (25 Pack)","description":"\u003cp\u003e\u003cstrong\u003eAn all-metal way to hold the glass.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese retainer clips are an all-metal alternative to plastic retaining clips for glass cabinet doors, and they go in in seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTension you can dial in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA thumb screw lets you set exactly how hard the clip presses on the glass, no tools needed. Soft brown vinyl tips protect the glass and keep it from rattling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with thin glass or thick doors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the screw backed all the way out, the glass can sit flush with the back of the door. Tighten it all the way down and it holds the back of the glass at an offset of up to 3\/8\". Flip the clip over and it handles offsets up to 1-1\/8\" for thicker doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA finish that goes with most wood.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe classic bronze finish suits most wood species and paint colors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA shop tip.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the screw sticks out farther than you want, pull off the vinyl cap and grind the screw end down to length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: all metal, with vinyl tips\u003c\/li\u003e\n\u003cli\u003eFinish: bronze\u003c\/li\u003e\n\u003cli\u003eOffset range: 0\" to 3\/8\" (up to 1-1\/8\" with the clip flipped)\u003c\/li\u003e\n\u003cli\u003eAdjustment: tool-free thumb screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25 Panel retainer clips with thumb screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47403261034585,"sku":"FTL-20025-BZ","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Thumb_Screw_Panel_Retainer_Main.jpg?v=1791521174"},{"product_id":"brown-nylon-furniture-levelers-t-nuts-set-of-4","title":"Brown Nylon Furniture Levelers with T-Nuts, 1\/4\" Thread (Set of 4)","description":"\u003cp\u003e\u003cstrong\u003eLevel it once and forget it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA table, stool or cabinet that rocks on an uneven floor gets old fast. These screw-in levelers let you dial each corner in so the piece sits solid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKind to your floors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brown nylon foot is 1\" across and tapered, with about 3\/4\" of contact on the floor, so it's safe on hardwood. Ridges around the edge give your fingers something to grip while you adjust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid threads, not wood screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach leveler has a 1\/4\" threaded stud, 1\" long, that runs into a T-nut. Every leg adjusts from 0\" to 9\/16\" and carries 100 lbs., or 400 lbs. for the set of 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrill a 5\/16\" hole, 1\" deep, at each corner. Tap in the T-nuts, screw in the levelers and back them out until the piece is level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: 1\/4\" threaded stud, 1\" long\u003c\/li\u003e\n\u003cli\u003eAdjustment: 0\" to 9\/16\" per leg\u003c\/li\u003e\n\u003cli\u003eFoot: 1\" diameter, tapered, about 3\/4\" floor contact\u003c\/li\u003e\n\u003cli\u003eMaterial: brown nylon foot\u003c\/li\u003e\n\u003cli\u003eLoad rating: 100 lbs. per leg, 400 lbs. per set of 4\u003c\/li\u003e\n\u003cli\u003eMounting hole: 5\/16\" diameter, 1\" deep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Brown levelers\u003c\/li\u003e\n\u003cli\u003e4 T-nuts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47405205782617,"sku":"FLS-40004-BR","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/LEFRN-NY-BRN.jpg?v=1791534549"},{"product_id":"cabinet-leveler-toe-kick-clips-12-pack","title":"Cabinet Leveler Toe Kick Clips (12 Pack)","description":"\u003cp\u003e\u003cstrong\u003eA clean toe kick with no screws showing.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese clips attach to the back of the toe kick and snap onto the leveler legs, so nothing goes through the face of the toe kick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for our cabinet leveler legs.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThey're designed to work with Desunia cabinet leveler legs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy you might need a few more.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach leg takes one clip. Our leveler kits include one clip for every two legs, because many installs use a wall ledger at the back instead of a leveler at each corner. If you're putting a leveler at every corner, this pack covers the shortfall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Desunia cabinet leveler legs\u003c\/li\u003e\n\u003cli\u003eClips per leg: 1\u003c\/li\u003e\n\u003cli\u003ePack count: 12\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12 toe kick clips\u003c\/li\u003e\n\u003cli\u003eAll mounting fasteners\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47405208272985,"sku":"FLP-30012-BK","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/LECAB-TOE-12.jpg?v=1791534557"},{"product_id":"super-duty-cabinet-leveler-legs-lock-nuts-4-pack","title":"Super Duty Cabinet Leveler Legs with Lock Nuts (4 Pack)","description":"\u003cp\u003e\u003cstrong\u003eBuilt for the heavy stuff.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese are for heavy machines, workbenches and equipment, especially anything that vibrates. When a regular leveler isn't enough, this is the one to reach for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThicker steel where it counts.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is 0.10\" thick steel, where most levelers use 0.08\". The zinc-plated foot has twice the steel of a typical foot, with a nylon base that's permanently embedded so it can't pop off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA stem that handles uneven floors.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1\/2\" diameter stem ends in a ball that sits in a nylon socket, so the foot tilts to sit flat on a floor that isn't.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLocks at the height you set.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnce you've got it level, run the 3\/4\" lock nut up tight against the bottom of the housing and the height stays put, vibration or not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to install.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3\/4\" wide ledger hooks under the cabinet. Hook it on, pre-drill, and fasten through both the side and the bottom with the screws we provide. They're pan head screws and take a #2 Phillips bit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHousing: 0.10\" thick steel\u003c\/li\u003e\n\u003cli\u003eStem: 1\/2\" diameter, ball end in nylon socket\u003c\/li\u003e\n\u003cli\u003eFoot: zinc-plated steel with embedded nylon base\u003c\/li\u003e\n\u003cli\u003eLedger: 3\/4\" wide, hooks under the cabinet\u003c\/li\u003e\n\u003cli\u003eLock nut: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eScrews: #10 x 1-1\/8\" pan head, take a #2 Phillips bit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHere's what you get.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 super duty leveler legs with lock nuts\u003c\/li\u003e\n\u003cli\u003e24 #10 x 1-1\/8\" pan head screws (#2 Phillips)\u003c\/li\u003e\n\u003cli\u003e1 6mm hex wrench\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Desunia","offers":[{"title":"Default Title","offer_id":47405211615321,"sku":"CLE-50001-ZN","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5361\/0585\/files\/Super_Duty_Levelers_Main.jpg?v=1791534573"}],"url":"https:\/\/desunia.com\/collections\/furniture-hardware.oembed","provider":"Desunia","version":"1.0","type":"link"}