1/4" HSS Brad Point Drill Bits (10 Pack)

Clean shelf pin holes, every time.

These 1/4" brad point bits are made for drilling shelf pin holes that come out clean and chip-free, in just about any material you'll put in a cabinet.

Why a brad point.

The center point locates the bit right where you want it, so it doesn't wander. The two outer cutting edges score a clean circle before the bit cuts, and the twin spirals pull the chips out of the hole.

Built to last.

They're made from high speed steel (HSS), a very good grade of steel that holds its edge through hundreds and hundreds of holes.

Consistent depth with the stop collar.

The included stop collar locks onto the bit with an Allen key, so every hole comes out the same depth and you don't drill through the cabinet side by accident.

Easy to keep track of.

The bits come in a re-closable plastic case, so they stay together in the shop drawer.

Specifications.

• Diameter: 1/4"
• Material: High speed steel (HSS)
• Tip: Brad point with two outer cutting edges and twin spirals
• Use: Shelf pin holes and general drilling

Here's what you get.

• 10 x 1/4" HSS brad point drill bits
• 1 stop collar with Allen key
• 1 re-closable plastic case