Interlocking Steel Z-Clips (1 Set)

Hang it flush. Hang it solid.

These Z-clips mount almost anything flush to a vertical surface: artwork, headboards, wall paneling, cabinets.

Only 1/4" thick.

The clips take up only 1/4" of thickness. Rout a recess in the back of the piece and it hangs completely flush to the wall.

Steel, not aluminum.

These clips are made of steel, so they're very strong.

They interlock, so nothing slides off.

The two halves lock together, so a hung item can't slide off to the side. That's a big safety feature.

Easier layout.

The countersunk screw holes are symmetrical, not staggered, which makes layout much easier. Each set has about 1/16" of side-to-side play. That's forgiving, but lay out carefully.

Simple to install.

Hole spacing is 1-9/16". Find the exact center of the stud and drive the 1-3/4" screws at a slight angle for a good bite.

1. Attach the wall clip first.
2. Secure the clip to the item using just 2 screws.
3. Hang the item. If no tweaks are needed, install the remaining screws.

Specifications.

• Material: Steel
• Assembled thickness: 1/4"
• Hole spacing: 1-9/16"
• Lateral play: About 1/16"
• Screws: 1-3/4", included

Here's what you get.

• 1 set of interlocking steel Z-clips (2 halves)
• All the necessary screws