Soft-Close Full Extension Ball Bearing Drawer Slides (100 lb, 1 Set)

Drawers that close themselves, quietly.

A heavy-duty spring takes over during the last 2 inches of travel, and a hydraulic piston eases the drawer the rest of the way shut. No slamming, no bouncing back open.

Heavier steel where it counts.

These slides are made from 1.5mm cold rolled steel. Many competing slides use 1mm steel. The extra thickness is a big part of why they carry a 100 lb load rating.

Full extension, smooth ball bearing action.

The drawer pulls all the way out, so you can reach what's in the back. The slides are side mount and non-handed, so either slide goes on either side.

A finish that hides fingerprints.

The zinc plating has a knurled pattern that cuts down on fingerprints and smudges.

Easy to take the drawer out.

An unobtrusive release lever lets you pull the drawer for cleaning or adjusting, and a metal engagement pin holds up far better than plastic. Oblong attachment holes give you room to fine-tune the fit before you set the last screws.

Specifications.

• Type: Side mount, full extension, ball bearing, soft-close
• Lengths: 12", 14", 16", 18", 20", 22", 24"
• Load rating: 100 lb
• Material: 1.5mm cold rolled steel
• Finish: Zinc plated, knurled
• Soft-close engagement: Last 2" of travel
• Handing: Non-handed
• Sold as: 1 set (enough for 1 drawer)

Here's what you get.

• 1 set of soft-close drawer slides (enough for 1 drawer)
• 16 low-profile Phillips head mounting screws
• Illustrated installation instructions