I received my order, but the brackets included were screw-in rather than the rear-pin style I had ordered. Desunia responded immediately and shipped replacement brackets the same day, which I greatly appreciated. Unfortunately, UPS lost the package, and I ultimately decided to use the screw-in brackets instead. Desunia even offered to send another replacement, but by that point I felt it wasn't necessary.My only real disappointment is the thickness of the curtain rod itself. Compared to rods I've purchased from another vendor, this one is noticeably thinner. That said, I don't recall what I paid for those previous rods, so the difference in quality may simply reflect a difference in price.Ordering was easy, customer service was excellent, and Desunia handled the issue promptly and professionally. Despite the mix-up and shipping problem, I would purchase from Desunia again.
Your closet opening width
Measure wall to wall. We'll subtract the bracket thickness for you.
| Up to 36" | $38.24 |
| Up to 48" | $41.64 |
| Up to 72" | $54.39 |
| Up to 94" | $59.49 |
You're $99.00 away from FREE shipping
- Cut to your exact measurements
- Usually ships same day
- Free shipping on orders over $99
Which sounds better?
Cutting a closet rod yourself—dealing with crooked cuts and rough edges… Or… Getting a perfectly sized rod, ready to install?
You give us your opening size—we'll take it from there.
No measuring twice, no cutting, no cleanup. We account for the thickness of the brackets so everything fits the way it should—no calculations needed on your end. Each rod is sized to fit your space, fully deburred inside and out, and ready to install. Skip the tools and get a perfect fit the first time.
Strong… as in… VERY strong.
Made from heavy-duty carbon steel with a 32mm (1-5/16") diameter, this rod is built to handle real weight. We didn't just assume that—we tested it under real-world loads, not theoretical ratings.
- 4' span → 63 lbs → 1/16" sag
- 5' span → 79 lbs → 1/8" sag
- 6' span → 95 lbs → 1/2" sag
Go ahead—load it up. Running longer than 6 feet, or packing in a heavy wardrobe? Add a mid support and it'll stay straight for the long haul.
Bright, clean chrome that holds up.
Before plating, we take the extra step of smoothing and refining the steel surface—because a great finish starts with what's underneath. The result is a clean, consistent chrome appearance that looks sharp on day one and stays that way over time.
Designed for system holes—clean, simple, and secure.
The included end supports use 5mm rear pins that fit standard "system hole" cabinetry, typically drilled at 32mm increments. If you're working with prefab closet panels or wardrobe systems, these are made to drop right in. Adjusting the rod height later is just as easy—simply reposition the supports to a new set of holes.
What sets ours apart are the rear pins themselves. Our exclusive design features four tapered wedges that bite into the wood as they're inserted, creating a tight, stable fit without looseness or rattle. It's a small detail—but one that makes a big difference in how solid everything feels.
In most cases, this is a fastener-free installation. For added flexibility, we include a screw with each support—just in case your holes are oversized or if you're drilling your own 5mm holes by hand.
As a final step, a discreet set screw locks the rod in place so it stays exactly where it should.
Here's what you get.
- 1 Custom sized polished chrome closet rod
- 2 Rear-pin end supports with set screws
- 1 Screw per support (for oversized or custom-drilled holes)
- Hex wrench
Before you order
What measurement should I provide?
• If you're ordering a custom rod only, give us the exact length you want.
• If you're ordering a custom rod with top mount brackets, give us the bracket-to-bracket size.
• If you're ordering a custom rod with rear-pin or screw-on brackets, give us the full closet opening. Walls are rarely perfectly straight, so measure exactly where the rod will sit. We account for bracket thickness so everything fits the way it should.
What kind of tolerance do you allow when making the cut?
You'll end up with about 1/16" of total play (1/32" per side).
If you're unsure of your measurements, it's safer to err slightly smaller. A rod that's too long won't fit.
How clean of a cut can I expect?
Our water-cooled industrial band saw makes a straight, square cut every time. We then deburr both the inside and outside by hand.
What you get is a rod that's ready to install—no cleanup needed.
Why can't I just cut it myself? Wouldn't I save some money?
Fair question—but what's your time worth?
Even assuming your cut is square, between measuring, cutting, and cleaning up the edges, it adds up quickly. We handle the hard part so you get a clean, accurate result without giving up your weekend.
Round Rod Specs
What diameter is the rod?
32mm, which is just under 1-5/16". The wall of the tube is a sturdy 1mm thick.
How much weight can it handle?
In our own real-world testing: a 4' span held 63 lbs with 1/16" of sag, a 5' span held 79 lbs with 1/8" of sag, and a 6' span held 95 lbs with 1/2" of sag.
Will I need a center support?
Up to about 5' the rod is very solid on its own. Around 6' you may see slight sag under heavy loads, so we recommend a center support for longer, fully loaded spans.
How does this compare to a telescoping rod?
Telescoping rods use thinner overlapping tubes, so they flex more and hold less. They also have a bump in the middle where the tubes overlap, which catches hangers. Ours is one solid piece of steel: stronger and cleaner looking.
Is a round rod stronger than an oval rod?
Yes. A round rod spreads the load more evenly, so it deflects less under weight.
