These are for heavy machines, workbenches and equipment, especially anything that vibrates. When a regular leveler isn't enough, this is the one to reach for.
Thicker steel where it counts.
The housing is 0.10" thick steel, where most levelers use 0.08". The zinc-plated foot has twice the steel of a typical foot, with a nylon base that's permanently embedded so it can't pop off.
A stem that handles uneven floors.
The 1/2" diameter stem ends in a ball that sits in a nylon socket, so the foot tilts to sit flat on a floor that isn't.
Locks at the height you set.
Once you've got it level, run the 3/4" lock nut up tight against the bottom of the housing and the height stays put, vibration or not.
Simple to install.
The 3/4" wide ledger hooks under the cabinet. Hook it on, pre-drill, and fasten through both the side and the bottom with the screws we provide. They're pan head screws and take a #2 Phillips bit.
Specifications.
Housing: 0.10" thick steel
Stem: 1/2" diameter, ball end in nylon socket
Foot: zinc-plated steel with embedded nylon base
Ledger: 3/4" wide, hooks under the cabinet
Lock nut: 3/4"
Screws: #10 x 1-1/8" pan head, take a #2 Phillips bit
Here's what you get.
4 super duty leveler legs with lock nuts
24 #10 x 1-1/8" pan head screws (#2 Phillips)
1 6mm hex wrench
5.0★★★★★★★★★★Based on 1 review
★★★★★★★★★★Kevin Paul
Verified buyer
June 2, 2025
Simply the best.
I tried several "other" levelers, but they could not hold up. DESUNIA exceeded my expectations and is doing the job. My workbench is a full-length bowling alley weighing in at over 4,000 lbs. It sits on 4 solid wood cabinets. The levelers easily hold it all up, and the silicone pad on the bottom allows me to slide everything over to clean and work on both sides. There is simply nothing on the market built like this. If I could give it 10 stars, I would.
