Matte Chrome 2-Piece Wire Grommet with Brush Opening, 2-3/8"

A clean finish for your cord holes.

A raw hole through a desk top looks unfinished and chews up cables. This grommet trims the edge of the hole and keeps your cords neat.

Metal, not plastic.

It's die-cast zinc, not plastic or stamped steel, so it feels solid in the hand.

Two pieces, so the plugs go through first.

The lower ring is a full, unbroken circle that goes in first. Route your wires through, then set the top piece in place and lock it with a slight clockwise turn. The hole takes plugs 2" or less.

A brush that protects your wires.

The wire opening is lined with a ring of nylon bristles, which keeps cords off the metal edge and tidies up the opening.

Easy to install.

Bore a 2-3/8" hole with a hole saw, and try it on scrap first. If the fit is a little loose, wrap one or two layers of tape around the grommet to snug it up.

Specifications.

• Hole size: 2-3/8" diameter
• Outer ring inside diameter: 2-1/16"
• Wire opening: 3/4" x 3/4"
• Plug capacity: 2" or less
• Material: die-cast zinc
• Finish: Matte Chrome
• Opening liner: nylon bristle brush

Here's what you get.

• 1 Two-piece wire grommet (lower ring and top piece)