Brown Nylon Furniture Levelers with T-Nuts, 1/4" Thread (Set of 4)

Level it once and forget it.

A table, stool or cabinet that rocks on an uneven floor gets old fast. These screw-in levelers let you dial each corner in so the piece sits solid.

Kind to your floors.

The brown nylon foot is 1" across and tapered, with about 3/4" of contact on the floor, so it's safe on hardwood. Ridges around the edge give your fingers something to grip while you adjust.

Solid threads, not wood screws.

Each leveler has a 1/4" threaded stud, 1" long, that runs into a T-nut. Every leg adjusts from 0" to 9/16" and carries 100 lbs., or 400 lbs. for the set of 4.

Simple to install.

Drill a 5/16" hole, 1" deep, at each corner. Tap in the T-nuts, screw in the levelers and back them out until the piece is level.

Specifications.

• Thread: 1/4" threaded stud, 1" long
• Adjustment: 0" to 9/16" per leg
• Foot: 1" diameter, tapered, about 3/4" floor contact
• Material: brown nylon foot
• Load rating: 100 lbs. per leg, 400 lbs. per set of 4
• Mounting hole: 5/16" diameter, 1" deep

Here's what you get.

• 4 Brown levelers
• 4 T-nuts