White Nylon Furniture Levelers with T-Nuts, 1/4" Thread (Set of 4)

Level it once and forget it.

A table, stool or cabinet that rocks on an uneven floor gets old fast. These screw-in levelers let you dial each corner in so the piece sits solid.

Kind to your floors.

The white nylon foot is 1" across and tapered, with about 3/4" of contact on the floor, so it's safe on hardwood. Ridges around the edge give your fingers something to grip while you adjust.

Solid threads, not wood screws.

Each leveler has a 1/4" threaded stud, 1" long, that runs into a T-nut. Every leg adjusts from 0" to 9/16" and carries 100 lbs., or 400 lbs. for the set of 4.

Installs in under 10 minutes.

Drill a 5/16" hole, 1" deep, at each corner. A wrap of tape on the bit makes a handy depth gauge. Tap in the T-nuts, screw in the levelers and back them out until the piece is level. Keep each leg in line with the cabinet sides for the most strength, and use an adjustable square to hold the same setback from the front.

Where to use them.

Tables, stools, grandfather clocks and most wood cabinets that need leveling.

Specifications.

• Thread: 1/4" threaded stud, 1" long
• Adjustment: 0" to 9/16" per leg
• Foot: 1" diameter, tapered, about 3/4" floor contact
• Material: white nylon foot
• Load rating: 100 lbs. per leg, 400 lbs. per set of 4
• Mounting hole: 5/16" diameter, 1" deep

Here's what you get.

• 4 White levelers
• 4 T-nuts